| Author |
Message |
    
Jeff Schuster (Froggy)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
Thanks to the good folks here, I have found out that the 6x6 that I have is a Wedge made by SPD. Does anyone out there have any info on them (literature, adds or old manuals) or know where I can find parts? I would be VERY appreciative of any and all help that you can offer. Thanks in advance!
http://www.gotocrystal.net/~speedy64/garage.htm |
Rob Taylor
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
I have recently had a 295 Wedge givin to me.It's missing the motor,tranny parts and the middle set of wheels.It has the jet drive still in tack and in good shape.Over all the hole buggy is in great condition.BUT I do need info and help finding parts and hopefully a manual.Any help would be great. |
Kevin Franken
New member
Username: Ridge_runner
Post Number: 4
Registered: 07-2005
Posted From: 199.152.141.26
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, January 31, 2006 - 10:25 am: | |
I am gettting ready to put new axle bearings and chains on my wedge. Does anyone know what size chain, It looks like 40 but not for sure, I am thinking of using the US TSUBAKI chain from grainger. Also, when I put the bearings back on should I put anti seize on the axle/bearing surface and blue lock tight on the setsrews.
Will 2 ten foot chains do it or do I need 3.
I appreciate any help. |
Restoration of older ATV's