Topics Topics Help/Instructions Help Edit Profile Profile Member List Register  
Search Last 1 | 3 | 7 Days Search Search Tree View Tree View  
Route 6x6 Discussion Board * Restoration of older ATV's * Belt swap on terra tiger < Previous Next >

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

barry heneyj (Bh72)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:45 pm:   

i just got a mint terra tiger with a hirth twin all axles and rims and clutches were done this things like new im a body man and i dont have the heart to even paint it but any way how does one swap the belt is there a hidden trick or does the shaft gotta come out any help would be great thanks barry heney in mass
Top of pagePrevious messageNext messageBottom of page Link to this message

david berger (Davidrrrd)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:45 pm:   

hi barry, rout6x6 is a wonderfull place and the discussion board has the most info on aatv's and so on next to the library of congras but it is a little to dificuld to find the info posted weeks or monthe let alone years ago, so someone who posted ansers or remembers what someone posted as an anser to a question some time in the past has the opertunity to read a new incarnation of the question a persom might not ever find this info,

aah but to this your question:
yes the shaft dose have to come out, study it well befor you do it so you get it back into place correctly, i had one, there is a trick,
same one used for most if not all the older models with a transmition that must be torn down to replace a belt, simply put perchus at least 2 belts and put them both over the shaft before you reasemble, next wire tie one of them out of your way in the engin-trany compartment so it dosent come into contact with any moveing objects and then put other belt into pullys, presto next time you need a belt you only need brake wire ties and your done, this makes for neet trail side repair and also is a great sales feature too!
did it on mine and it helped by trail side and again when it came time to sell it, person was greatly releaved he wouldent have to take trany apart when belt gets old,
david berger
(whos also from mass)
Top of pagePrevious messageNext messageBottom of page Link to this message

shelzac

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:45 pm:   

Barry,
I've got a Terra Tiger also. Yes, the shaft must come out to replace the belt. Some one suggested installing 2 belts at the same time and wiring 1 out of the way. Then, the next time the belt needs replacement, just cut it off and put the new belt on the pulleys. It'll save you tons of time.
Sheldon
Top of pagePrevious messageNext messageBottom of page Link to this message

clyde ( - 4.226.72.46)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:45 pm:   

does anybody know of a repair shop near dallas texas to fix a terra..

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Action: