| Author |
Message |
    
Randy Clark
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:45 pm: | |
I need some brake parts to complete my Hustler restoration. All that came with the machine was the brake disc, which bolts to the transmission. I am looking for: hand brake lever assembly, cable and caliper mechanism. Maybe someone has a parts machine with these ? Thanks |
Robert C Pickerd (Tugger)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:45 pm: | |
Randy I have a 70 something Hustler and do not use the handbrake parts...I have the lever and most(?) of the caliper and possible cable for it.
E-mail me at buoybandit@aptalaska.net and maybe I can send some or all of the parts you need |
david berger (Davidrrrd)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:45 pm: | |
robert you can alwase updat that brakeing system with hydralic calipers like found on motorcycles or quades, also a master cyilinder lever on left laterel would be a great brakeing system |
Randy Clark
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:45 pm: | |
Robert: Thanks for sending the caliper assembly - looks like it will bolt right on my machine without modification. I found the original supplier: Ausco Products no: 29660, no longer available, pad no: 39519 is available through distributors.
I have identified the parking brake lever as an "Orscheln Products" parking brake lever no: 02182600 and also a distributor to purchase one for about $27.00.
I have uploaded photos to my website:
http://observa-dome.com/images/caliper1.jpg
http://observa-dome.com/images/caliper2.jpg
http://observa-dome.com/images/pblever.jpg
Now all thats needed is a parking brake cable, for an early 80's machine! If anyone out there has one available in any condition, For duplication purposes? I would happily have a new one made up for you for your efforts!
Thanks again to all
Randy |
Stan Anderson
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:45 pm: | |
Randy: I could use a replacement parking brake cable for an early 80's (I think) Hustler. Your caliper photos look like mine. Do you still want a complete cable as a model? I'd send you my intact but old cable. Or if you've already had one made up, please let me know about it as I want one, too. Thanks! |
masteratver
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:45 pm: | |
Stan
I think richard still has a few of the cables,
along with T-20 trans connector cables for the
earler Hustlers, but I understand he converts
them to the newer style when he does Hustler
T 20 repairs. as he did to mine years ago, still
working great
Robert |
Randy Clark
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:45 pm: | |
Still searching for an intact brake cable for pattern to have new ones made. If anyone has one to offer, as mentioned before will gladly have a new one made for you for your efforts.
Again, this is for the later hustler models, which have the brake disc mounted on the right hand output shaft of the T-20 transmission.
Thanks
Randy |
Restoration of older ATV's