Topics Topics Help/Instructions Help Edit Profile Profile Member List Register  
Search Last 1 | 3 | 7 Days Search Search Tree View Tree View  
Route 6x6 Discussion Board * Shop Talk: Tech Tips and Q&A section * Help With Engine Swaps!!!! < Previous Next >

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Scott Philipps (Argosrus)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

i have an 83 argo Mangum with a 18 hp kohler..i need some more power for having fun/and working, mainly fun..i need somthing that will get up and go not give me top speed..i was thinking about going for a 23 Briggs and Stratton. Or a 25 Hp Kohler Commander..i dont know fi the commander will fit but that would be my 1st coice..ho wmuch work is involved in this swap..i know its nota easy task..Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

david berger (Davidrrrd)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

scott the 23 briggs realy sings with a rev kit,
there are no hop up parts for kholer engines,
and theres tones of preformance parts for briggs engines,
get the 23 briggs!
Top of pagePrevious messageNext messageBottom of page Link to this message

David Keeso (Argomag)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

Will the Kohler Command 25hp fit into an ARGO MAGNUM? That is the engine I want when mine dies, but who if i have to make any modifications, im in trouble. Will it work with all the gearing and the parts already in the vehicle?
Top of pagePrevious messageNext messageBottom of page Link to this message

Scott Philipps (Argosrus)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

is the swap for the 23 a direct drop in or is there some modifications involved..do u have any sites where i can get info on a rev kit?
Top of pagePrevious messageNext messageBottom of page Link to this message

david berger (Davidrrrd)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

i beleave john hoath (argoguru)put a 23 in his 8x8
he temporarely bypased the oil cooler to get it in and also modifyd the mounts, ect.ect..
looked like it wouldent be to tough to find a good spot for the cooler,
as to the site for preformace parts,
mudbuster (timothy@acol) has modifyed his 23 with a rev kit,he has that info.
i have a 440 2 stroke and i can't get away from him on a trail!
Top of pagePrevious messageNext messageBottom of page Link to this message

newmax

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

can anyone tell me what the rev kit is
Top of pagePrevious messageNext messageBottom of page Link to this message

Scott Philipps (Argosrus)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

"i have a 440 2 stroke and i can't get away from him on a trail!"

hehehe sounds like somthing im going to like, does the rev kit just take the rev limiter off?
Top of pagePrevious messageNext messageBottom of page Link to this message

Timothy Schotanus (Mudbuster)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

I put a "rev kit" in my 23hp briggs. I raised the compression with dome pistons too. The parts I used where:
new pistons
rings
connecting rods
valve spring retainers
shims to increase valve spring pressure
exhaust push rods(factory is aluminium)
New torque specs and valve adjustment specs
It took me a little while to get it right after doing the work. I took it to pete's spring fling on it's maiden voyage and was a little dissapointed with it there but after playing with the carb and working on the governer(throwing it in the trash)it runs amazing compared to the factory 23hp.
Top of pagePrevious messageNext messageBottom of page Link to this message

Timothy Schotanus (Mudbuster)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

forgot to put in my last post that the 23hp is a bigger block than the other engines. A "revved up" 20hp should drop in and give you ample power. Be warned that you will need fuel with very high octain to run high compression.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dan Hammontree ( - 168.189.64.96)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

I need to soop up an 18hp briggs, What can I do without dropping too much money or digging too deep into the engine? carb, air filter, pluggs,?
Top of pagePrevious messageNext messageBottom of page Link to this message

Damen T.Hill (Argoss)

Rating: 
Votes: 1 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

As most of you know I run snowmobile engines in my argos, and they out perform the briggs and kohlers by far. And Also you can usally pick up an old snowmobile out of sombodys yard for real cheap. and maybe put 300 dollars in to the motor having it rebuilt, and have a motor that out performs a new one. I am maching up the exaust on my latest motor swap (blew my last motor up) Its a 50HP RUPP, I scored it for free and it runs.

Now as for good sleds to use, I try to get liquifires (their liquid cooled)and rated at 50hp, or RUPP NITRO 440s also rated at 50hp, yamahas,or kawasaki's work good to.But the absolute best ones are the ones you get for free. All you gotta do if you see an old sled sitting someware I have found is offer to haul it away for the owner (I have gotten 4 sleds this way and three of them run)I will post pictures of my latest argo swap on my web site tomarrow.

Now I know what most of you are thinking about the added stress of of 30 more horses in an argo, I have never had a stress failure, Blew a driver clutch once but that was from a worn clutch stop. any jarring from the extra power is asorbed by the drive belt.

if anybody wants to learn more about installing sled engines in argos just ask me.

argoss
Top of pagePrevious messageNext messageBottom of page Link to this message

Damen T.Hill (Argoss)

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, February 23, 2005 - 10:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

Oh yeah forgot to mention my top speed on my argo supersport has been gps clocked at 55mph on dirt, Its squily as heck but man its fun! and the 440cc motors I run let argos do awsome doughnuts in the mud They will roost mud about 25 feet in the air!

well later
argoss
(damen Hill)

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Action: