| Author |
Message |
    
albert petit
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:24 pm: | 
|
i have max with aluminun body custom made frame a 440 lc twin at 60 hp and havent a problem with that much power except on hills where it just spins. this machine will do wheel stands from dead stop and go faster than i want to go 60 hp is more than enough. a stock body and frame cant handle this much power ben there done that you"LL rip out the adjusters and make a banna out of the frame which i did twice before made my own frame and body |
david berger (Davidrrrd)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:24 pm: |
|
heh heh heh, don't i know it, my adjusters know it too!im planing to do the fraim, somday anyhow.
till then i just screw up adjusters, heh heh heh, |
Dennis F. Saskowski
Advanced Member
Username: Sasko
Post Number: 113
Registered: 07-2005
Posted From: 24.172.220.57
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 27, 2007 - 04:20 pm: |
|
Jumped in on this thread because it already existed for the qustion I have.It was talked about before ,but how much posi-trac enhancer do I add to my T-20,usually use old style mercon that has enhancers in it(pre- ford 1972) but that stuff is getting hard to find plus I have open qts. of other types of tranny fluid to use up.Thanks, Sasko |
Richard Clark
Senior Member
Username: Route6x6
Post Number: 184
Registered: 02-1997
Posted From: 74.129.201.133
Rating: 
Votes: 1 (Vote!) | | Posted on Monday, August 27, 2007 - 06:02 pm: |
|
Dennis
Use 4oz of GM rear end additive, we are using
Dextron III Fluid
Thanks
Richard Clark
ROUTE6x6
See my ATV parts website (listed below) for more ATV parts.
I have the world's largest supply of new, used and reproduction
AATV parts. We have most parts for most machines. Please call
on phone for details.
Terms:
We accept Visa. Mastercard and Discover Credit Cards, along with Money Orders
For your protection we only accept credit cards by telephone authorization.
--
Thanks,
Richard Clark
_________________________________________________
ROUTE6x6
4846 Quarry Rd
New Albany IN 47150
812-944-1643 8am- 6pm Eastern Time Monday-Friday only
Please NOTE EXTENDED HOURS
PLEASE NOTE: THE ABOVE ADDRESS IS FOR MAIL and SHIPPING USE ONLY,
I keep no machines or parts at the above address. Also there
are no business hours at the above address.
Visit my ATV parts website at:
http://members.aye.net/~rclark/
Visit my ROUTE6x6 website at: http://www.route6x6.com/ |
L.A. Philip Osborn
Intermediate Member
Username: Roadwolf
Post Number: 92
Registered: 02-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, August 28, 2007 - 03:58 pm: |
|
Richard I can not find Dextron III, they say it has been changed to something else, and the new stuff will work fine, what do you think
Thanks Phillip Osborn |
Richard Clark
Senior Member
Username: Route6x6
Post Number: 186
Registered: 02-1997
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, August 28, 2007 - 09:33 pm: |
|
Phillip
Yes the new fluid will work fine as long as it is
usable with Dextron III, Do not use the new synthetic fluid, I do not know why, but it does not work well at all.
Don't forget to install 4oz of GM rear end additive to your T-20.
Thanks
Richard Clark
ROUTE6x6
See my ATV parts website (listed below) for more ATV parts.
I have the world's largest supply of new, used and reproduction
AATV parts. We have most parts for most machines. Please call
on phone for details.
Terms:
We accept Visa. Mastercard and Discover Credit Cards, along with Money Orders
For your protection we only accept credit cards by telephone authorization.
--
Thanks,
Richard Clark
_________________________________________________
ROUTE6x6
4846 Quarry Rd
New Albany IN 47150
812-944-1643 8am- 6pm Eastern Time Monday-Friday only
Please NOTE EXTENDED HOURS
PLEASE NOTE: THE ABOVE ADDRESS IS FOR MAIL and SHIPPING USE ONLY,
I keep no machines or parts at the above address. Also there
are no business hours at the above address.
Visit my ATV parts website at:
http://members.aye.net/~rclark/
Visit my ROUTE6x6 website at: http://www.route6x6.com/ |
Shop Talk: Tech Tips and Q&A section 
Closed: New threads not accepted on this page