| Author |
Message |
    
Chris
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:28 pm: | 
|
I went to my local auto shop and couldn't find a hitch ball with a small enough shank to fit through the hitch on my Max. I've seen other people have a hitch ball on theirs, does anyone know where I can find a smaller diameter shank that would fit a Max? |
mike tufano (Maximus)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:28 pm: |
|
yes its called get out a dremil or air grinder with an half inch bit and inlarge the hole 1/16 to allow the ball shank to fit.good luck! it took me 5 min. |
mark harding (Promoza)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:28 pm: |
|
ok chris was in the same spot the hole was to small i took a die grinder to inlarge mine it fit's now just a small bit needed to be removed good luck
mark |
Chris
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:28 pm: |
|
Ummmm.... I don't have a grinder, but I do have a dremil. That can grind away metal? Seems a bit out of it's league, but I'm game to try it. Thanks for the tips guys. |
Brian S
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:28 pm: |
|
Go to a farm store and buy one for a atv or lawn mower and it will be the right size. |
pete6x6
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:28 pm: |
|
Chris,
Your local Tractor Supply has them. |
Shop Talk: Tech Tips and Q&A section