Topics Topics Help/Instructions Help Edit Profile Profile Member List Register  
Search Last 1 | 3 | 7 Days Search Search Tree View Tree View  
Route 6x6 Discussion Board * Shop Talk: Tech Tips and Q&A section * Max IV T-20 wont turn < Previous Next >

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryan Gunner
New member
Username: Ryank

Post Number: 1
Registered: 03-2014

Rating: N/A
Votes: 0 (Vote!)

Posted on Monday, March 17, 2014 - 08:54 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

I have a 95 Max IV and I was parallel parking it in a corner of my garage when i just quit turning in reverse then I put it into forward and it wouldnt turn in any direction forward or reverse. It goes into gear ( forward and reverse) just fine and will drive. It just wont turn. It is full of fluid and I visually checked all linkage and chains everything seams to be just like it was before this happened. I have only had this machine for a few months so I am new to these vehicles. I cant find much troubleshooting information anywhere on the internet. Thanks for the help!
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeff bar
Advanced Member
Username: Argo8x8

Post Number: 226
Registered: 03-2005

Rating: N/A
Votes: 0 (Vote!)

Posted on Tuesday, March 18, 2014 - 01:11 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

Better call Richard Clark or RI as they are the best one the web, sounds like you may have broken a band inside the trans JeffBart
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeff bar
Advanced Member
Username: Argo8x8

Post Number: 227
Registered: 03-2005

Rating: N/A
Votes: 0 (Vote!)

Posted on Tuesday, March 18, 2014 - 01:13 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

Ryan

Check out this link: Jeff Bar

http://www.route6x6.com/howto/T-20disassembly/index.html
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryan Gunner
New member
Username: Ryank

Post Number: 2
Registered: 03-2014

Rating: N/A
Votes: 0 (Vote!)

Posted on Tuesday, March 18, 2014 - 07:17 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

Thank you for the response. Is there any way to guess witch one it is? It looks like changing two of the bands is very easy and the other two not so much. Are they all the same bands just installed in different directions? Or are they four different bands for the specific spot they are in?
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryan Gunner
New member
Username: Ryank

Post Number: 3
Registered: 03-2014

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, March 19, 2014 - 11:16 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

Well I took the t 20 out and apart. Everything looks beautiful, it's all intact and in great shape. I guess that's good news but it still doesn't solve my problem. Any ideas!?
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeff bar
Advanced Member
Username: Argo8x8

Post Number: 228
Registered: 03-2005

Rating: N/A
Votes: 0 (Vote!)

Posted on Thursday, March 20, 2014 - 11:51 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

Are you sure one loop is not loose on one of the 4 bands? Jeff Bar
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryan Gunner
New member
Username: Ryank

Post Number: 4
Registered: 03-2014

Rating: N/A
Votes: 0 (Vote!)

Posted on Friday, March 21, 2014 - 09:05 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

None of the bands looked different than any of the others. I put it all back together and adjusted the bands properly. I put in new chain, new idler sprockets and seemingly adjusted everything correctly. I put the the motor back in etc. I started her up and I did not fix the problem whatsoever. This is what it is doing. In forward gear, give it gas it goes straight forward, pull back on the left stick it goes straight forward, pull back on the right stick it does nothing. In reverse gear, pull back on both sticks it goes in reverse, pull back on just the left stick it does nothing, pull back on just the right stick it goes straight back. Ive talked to several people and it seams it will be a little easier to be able to read it a few time while your thinking. So far I dont feel its the bands BUT Ive never worked on a t20 before so what do I know. Any and all ideas will be very help full. Thanks

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Action: