| Author |
Message |
    
Matt Marzen
New member
Username: Matt_maxii
Post Number: 2
Registered: 07-2011
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, July 09, 2011 - 12:36 pm: | 
|
Have a 90's something max II and it runs, drives, and steers perfectly in reverse but in forward it will drive straight but wont steer at all. Any info would be appreciated!! |
Jeff bar
Advanced Member
Username: Argo8x8
Post Number: 215
Registered: 03-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, July 10, 2011 - 09:22 am: |
|
Make sure all 6 of your tires are inflated to have the same distance around, measure with a cloth tape.
This will fix your issue Jeff Bar |
Matt Marzen
New member
Username: Matt_maxii
Post Number: 4
Registered: 07-2011
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, July 10, 2011 - 03:50 pm: |
|
Hey Jeff I got all the tires to the same distance around but unfortunatley that wasn't the issue. With the machine in reverse it steers perfectly left and right. While driving straight in forward, when I pull the left stick back to turn left nothing happens and the machine keeps going straight. When I pull the right stick back it seems to lock up the right side but it just stops the machine and doesn't turn. Could it be something inside the trans on the forward side that is broke? I pulled out the diamonds and cleaned them off and the little nipples are in good shape so I know it is shifting all the way into forward gear. |
Shop Talk: Tech Tips and Q&A section