    
David McLeary
New member
Username: Bigolliedog
Post Number: 1
Registered: 02-2011
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, February 05, 2011 - 11:51 pm: | 
|
My 1999 Max IV somehow twisted the frame under the back half and behind the transmission. In pulling the transmission, it simply sits in 4 grooves by way of the transmission studs. Between each sides mounting grooves there is a square cut out. Is there a bracket that mounts to the bottom of the transmission and sits in the cut out to prevent transmission movement? (similar to those on the top that hold the shifters in). The reason for asking is the grooves look like they are stretching out or there has been some transmission movement between the studs and the grooves but the nuts were tight. I have straightened and reinforced the frame but don't want any more damage or wear. Thanks for any help. |
Shop Talk: Tech Tips and Q&A section