Topics Topics Help/Instructions Help Edit Profile Profile Member List Register  
Search Last 1 | 3 | 7 Days Search Search Tree View Tree View  
Route 6x6 Discussion Board * Shop Talk: Tech Tips and Q&A section * Locking collars loosen off < Previous Next >

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Johan
Intermediate Member
Username: Hammr

Post Number: 67
Registered: 12-2008

Rating: N/A
Votes: 0 (Vote!)

Posted on Monday, December 13, 2010 - 12:51 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

I just replaced all the chain and a number of bearings, bearing flanges, ans all of that good stuff. After driving the Argo for a while I notice that some of the shafts move in because the locking collars had loosened off. I have found this with more than one so far so that makes me think that I just didn't miss tightening them. I can't see that excuse for more than one and the set screw have to be backed off to get them to re-seat on the bearings. Any reason anyone can think of why these can loosen off when they are hammered in place, and the set screw is tightened?

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Action: