    
glenn skoff
New member
Username: Glennster
Post Number: 2
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, March 23, 2008 - 05:21 pm: | 
|
have an attex st400, tried adjusting the trans according to the manual, kind of confusing. the 4 plungers that go into the case are supposed to be 1-1/4 inches out from the case to the center of the eyebolt, with a maximum of 7/8 inch of the plunger showing before the brake bands need replacing. from the manual, it says to turn the eyebolts clockwise to adjust. they get shorter. unscrewing them to get the 1-1/4 " the eyebolts hit the metal lever before i can get that much travel. i dont want to push the plungers in, from the manual it says about 1/2 inch in max before the o-ring gets damaged. what am i missing here??? |
Shop Talk: Tech Tips and Q&A section