    
Alan Fettes
New member
Username: Littlealfet
Post Number: 7
Registered: 11-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, January 08, 2008 - 05:53 pm: | 
|
I have an older Max with a Rockwell single cylinder engine and a tillotson carb, I beleive it is a 19A. It also came with a second tillotson carb which is a 21A carb; what is the difference, they both look the same? The machine is hard to start and seems like I always have to give it a shot of starting fluid after it sits all week to get it going and readjust the mixture on the carb, I have removed the welch plugs and cleaned the carb ,but I did notice that it didn't take much for the needle to stick " the needle is new". I put a little light oil on the needle when put together, but it didn't help. Does someone know where I can get a new needle and control arm that clip together so they move at the same time, no sticking? Thanks for the help. |
Shop Talk: Tech Tips and Q&A section