Route 6x6 Discussion Board: Argo Chains

Route 6x6 Discussion Board Shop Talk: Tech Tips and Q&A section Argo Chains

< Previous Next >

Author

Message

Butch Herb
New member
Username: Butch

Post Number: 1
Registered: 02-2005
Posted From: 72.147.89.221

Rating: N/A
Votes: 0 (Vote!)

Posted on Sunday, September 10, 2006 - 07:43 pm:

I have replaced all the chains on my 94 Conquest except for the front chains. Are replacing these front chains (no adjusters) any more difficult than the others ?

Any recommendations are welcome.

Jerry R. Nuss, Max Dealer in Illinois
Senior Member
Username: Jerrynuss

Post Number: 349
Registered: 02-2005
Posted From: 71.244.212.210

Rating: N/A
Votes: 0 (Vote!)

Posted on Sunday, September 10, 2006 - 11:24 pm:

They are not any more difficult than the others except getting to them but that is not really a problem. They are so short and don't need the adjusters. You can use a wire tie to hold the chain so it doesn't drop off the sprockets then use some vise grips to pull the links together so you can get the master link in. Of course get all the wheels up off the ground.