| Author |
Message |
    
(Unregistered Guest)
Unregistered guest
Posted From: 69.90.247.77
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, January 30, 2006 - 10:32 pm: | 
|
Wow, take me few hours to figure it out, put a new battery and recharge battery but it won't crank. Finally i dead tight the positive and negetive connectors and finally start ok. Maybe i DID NOT tighten the connector so it doesn't work, but what i think it should work when metal touch, pls correct me if i am wrong in this theory.
Thanks! |
david berger
Senior Member
Username: Davidrrrd
Post Number: 261
Registered: 01-2005
Posted From: 172.135.203.30
Rating: 
Votes: 1 (Vote!) | | Posted on Tuesday, January 31, 2006 - 09:30 am: |
|
batterys and sometimes connecters if lead can carod slightly, leadoxid is the dark color lead turns, it dosent conduct electrisity well, but cleaned off serfice or air tight clean direct contact as with tight clamp provides the good contact and good relyable power. |
Erich Kelter
Junior Member
Username: Fisherman
Post Number: 14
Registered: 11-2005
Posted From: 69.158.78.248
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, January 31, 2006 - 03:05 pm: |
|
That's one of those maintenance things, once a year or so, undo the battery posts, a little bit of emery cloth or plumber sandpaper(comes in handy strips) and a couple of twists around each post and the inside surface of the clamps does wonders. Then undo the wiring from each terminal and shine them up and re attach. |
Erich Kelter
Junior Member
Username: Fisherman
Post Number: 15
Registered: 11-2005
Posted From: 69.158.78.248
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, January 31, 2006 - 03:07 pm: |
|
That's one of those maintenance things, once a year or so, undo the battery posts, a little bit of emery cloth or plumber sandpaper(comes in handy strips) and a couple of twists around each post and the inside surface of the clamps does wonders. Then undo the wiring from each terminal and shine them up and re attach. |
Shop Talk: Tech Tips and Q&A section