Topics Topics Help/Instructions Help Edit Profile Profile Member List Register  
Search Last 1 | 3 | 7 Days Search Search Tree View Tree View  
Route 6x6 Discussion Board * Shop Talk: Tech Tips and Q&A section * Argo chains < Previous Next >

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Ted Champine Jr
New member
Username: Dmcalaska

Post Number: 3
Registered: 01-2006
Posted From: 24.237.81.192

Rating: N/A
Votes: 0 (Vote!)

Posted on Sunday, January 29, 2006 - 07:57 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

anyone help me with my chains on 05 argo avenger with tracks,,,chains keep getting tighter on bottom an wearing out palstic slides?
Top of pagePrevious messageNext messageBottom of page Link to this message

Erich Kelter
Member
Username: Fisherman

Post Number: 20
Registered: 11-2005
Posted From: 69.158.72.36

Rating: N/A
Votes: 0 (Vote!)

Posted on Thursday, February 16, 2006 - 01:15 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

To understand this correctly, you are saying that your drive chains are tighter on the bottom side than the top? If so, then the only thing I can envision is that our tire pressure may be lower on the inner tires, higher on the rear tires. This would be due to the radius of the tire being slightly larger on the higher pressure ones, a slight imbalance, but the sprockets/chains are the same on each axle. Something has to tighten somewhere, similar to running an engaged 4x4 around corners on dry ground, the distance front and rear wheels traveled is different. Just for the test, drive it backwards a bit and see if they loosen off.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Action: