    
Bama Stripes (Unregistered Guest)
Unregistered guest
Posted From: 68.159.174.189
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, January 28, 2006 - 09:36 pm: | 
|
My Conquest is starting to take on water, and after swimming my Argo without the floor pans, I have determined the water is coming in around the wheels. My unit has 250 hours and I have been told I should go ahead change out the bearings,seals, gaskets, etc. That will solve the problem.
My question is how do I determine if my bearings are bad or is there something else that could be causing the leaking issue that is not as drastic a repair job. If the problem is bearings, how difficult a job is it to make the repairs. Thanks. |
Skip Saul
Junior Member
Username: Giantdog
Post Number: 11
Registered: 02-2005
Posted From: 64.186.98.66
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, January 28, 2006 - 11:11 pm: |
|
mine did the same thing with about the same amount of Hours on it all i did was pump some water risinent grease in it and tghtend the carrage bolts around each barring they were all very loose then I took a little windsheld siliacone sealent and put around each one were it tuches the body and now it been about a year and still no leaks but i grease the axels about every six months with the water resinent grease |
Shop Talk: Tech Tips and Q&A section