Topics Topics Help/Instructions Help Edit Profile Profile Member List Register  
Search Last 1 | 3 | 7 Days Search Search Tree View Tree View  
Route 6x6 Discussion Board * Shop Talk: Tech Tips and Q&A section * Newbie with a Max Buffalo Truck < Previous Next >

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Marty Irion
New member
Username: Martyi

Post Number: 1
Registered: 12-2005
Posted From: 216.158.170.4

Rating: N/A
Votes: 0 (Vote!)

Posted on Tuesday, December 20, 2005 - 09:28 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

Hi Folks,
A friend just gave me a Max Buffalo Truck with about 180hrs on it. It has a plow/winch and 26" tires. I have never though of having one of these but could not pass up the deal. The Max looks well taken care of. He used it to haul firewood for his house. I am planning on using this for fun and a bit of plowing. Can the buffalo do what other 6x6's can? Can the bed be changed to add seats for my two young boys? Why is this so heavy, and can I/should I lighten it up? Any suggestions comments about this vehicle? I wonder if anyone else out there has one used for fun and rec only? Thanks for the help.
Marty
Top of pagePrevious messageNext messageBottom of page Link to this message

Howard Hoover
New member
Username: Howard_hoover

Post Number: 3
Registered: 10-2005
Posted From: 4.161.108.207

Rating: N/A
Votes: 0 (Vote!)

Posted on Tuesday, December 20, 2005 - 11:43 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

What kind of deal did you have to make to get it for free? They do weigh more than a quad, and have more rolling resistance than a quad ( more tires, chains,etc.) so they are a lot harder to push by hand. There might be a few small things you could remove to lighten it up a bit but it probably wouldn't be of any significant amount that you would notice any performance gains. The body's themselves don't weigh that much they are made of (HDPE) High Density Poly Ethylene, same stuff drop in bed liners are made out of. And I
wouldn't suggest trying to lighten up the frame or anything inside the body as this would probably just compromise the strength of the frame & drive components. Most people you find on the board are trying to find ways to improve their AATV's and are adding things to strengthen them up as the manufacturers sometimes don't address some of the problems with failures people are finding in their machines for quite a while after their knowledge of it and very rarely have I ever heard of a call back.
Top of pagePrevious messageNext messageBottom of page Link to this message

philip w.cox
Intermediate Member
Username: Philipatmaxfour

Post Number: 71
Registered: 01-2005
Posted From: 216.208.194.158

Rating: 
Votes: 1 (Vote!)

Posted on Wednesday, December 21, 2005 - 05:27 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

MARTY,re: " can the bed be changed to add seats for my two boys" YES and it's called a Max IV. It is available with the same engine as the one you have or even larger. Somewhere there are guys wondering how to adapt their Max IVs to carry stuff like firewood. Instead of people causing irrepairable damage to machines that have only 180 hours on them I would recommend that you contact a Max dealer or the factory about a trade. I am not sure about your concern re: their weight but if you want to have over 2 hours of fun and see many of these vehicles in EXTREME action contact John Schwab whose profile is on this site and ask him to send you a video. Haspin acres Nov, 2005 is the newest, equal to the best and costs less than $20 in the U.S.A.(I,m a Canadian and John mails them here for$20 US.) GOOD LUCK and happy riding W, Philip Cox

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Action: