    
Todd Bonney
New member
Username: Bigmeanie
Post Number: 1
Registered: 10-2005
Posted From: 64.252.167.78
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, December 02, 2005 - 11:04 pm: | 
|
Hey guys, I need some help. I bought a 1968? amphicat Model 79 and did a 16 hp B/S vangaurd convertion. This thing is awsome. It is just about completely restored. Everthing was working excelant until.... heres my problem.
I took the transmision out and replaced the (47)shaft seals, part #511023. Then I put the Tran back together everything was fine, so I thought.
I started it up and it worked fine until I tryed reverse. Then It made a loud grinding noise.
I took the Trans back out and took the covers off and discovered that the (39)Plate -Pinion Carrier part# 510537 no holes was not lined up and got damaged, I also damaged the (36)Bearing-Bronze-Pinion part# 510637 and one of the (38) Gear-pinion part# 510534.
I was wondering if anybody knows where I can get these parts or if anybody has parts they are willing to sell. All of the part numbers came for the owners manual I bought from Richards 6X6. I new to this so any help would be greatly appreciated. I have already contacted Richard and they don't carry these parts. Thanks Todd } |
Shop Talk: Tech Tips and Q&A section