| Author |
Message |
    
Mike Maroni
New member
Username: Micmac
Post Number: 3
Registered: 07-2005
Posted From: 162.84.74.132
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, November 25, 2005 - 05:44 am: | 
|
How do remove the drive belt on a 16 hp B&S Vanguard? I don't see any adjustment screws to losen it. |
swamprat (Unregistered Guest)
Unregistered guest
Posted From: 69.141.197.101
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, November 25, 2005 - 06:10 am: |
|
I moved the engine towards the tranny by loosening the mounting bolts. |
Fred Sowerwine, Montana's Max dealer
Advanced Member
Username: Fred4dot
Post Number: 106
Registered: 01-2005
Posted From: 216.166.168.53
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, November 25, 2005 - 10:40 am: |
|
Just walk it off the driven pulley (one on the tranny). you have to twist it to get it between the body and the pulley. It is snug, but will come off without loosening anything. |
Mike Maroni
New member
Username: Micmac
Post Number: 4
Registered: 07-2005
Posted From: 162.84.74.132
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, November 25, 2005 - 02:15 pm: |
|
Thanks Fred that worked just needed to give it a squirt of elbow grease! |
philip w.cox
Intermediate Member
Username: Philipatmaxfour
Post Number: 58
Registered: 01-2005
Posted From: 209.226.25.124
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, November 25, 2005 - 09:05 pm: |
|
Hey mike-this is fred's advice not mine but I tried it when he told us to and it works wonders-Put belt dressing on that belt before you put it back on. |
Shop Talk: Tech Tips and Q&A section