Route 6x6 Discussion Board: Tracks on MAX IV

Route 6x6 Discussion Board Shop Talk: Tech Tips and Q&A section Tracks on MAX IV

< Previous Next >

Author

Message

Stuart Barrows
New member
Username: Trappercreek

Post Number: 1
Registered: 03-2005
Posted From: 205.140.87.238

Rating: N/A
Votes: 0 (Vote!)

Posted on Thursday, March 24, 2005 - 07:04 pm:

I have a '95 Max IV and want to put tracks on it. I have already replaced the rear axles to splined.
Do I need to change the other axles out also? What else do I need to watch out for? Any advice or insights is appreciated.

Anybody tried the TRU TRAX? What did you think?

Timothy Schotanus
New member
Username: Mudbuster

Post Number: 3
Registered: 01-2005
Posted From: 70.19.219.57

Rating: N/A
Votes: 0 (Vote!)

Posted on Friday, March 25, 2005 - 11:18 am:

I would recomend having all 4 corner axles the new splined type,tracks put quite a load on the axles. I have the new style 15" wide factory max track and have had no troubles at all. I do run lower tire pressure than is recomended,about 2psi or less. I have never thrown a track or lost a bead(I have k-rims) I looked into tru-trax, their price is a lot better. However I found a set of factory tracks used and couldn't pass up the price.