| Author |
Message |
    
Geno Hanselman
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:39 pm: | 
|
I have a Max IV and it won't turn right. What is wrong? I have service manual. |
c.mcnamee ( - 12.12.205.60)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:39 pm: |
|
Try checking to see if linkage is to both sides of t-20 transmission. They should BOTH be hooked up, and operate with the lever. I had an arm for the shifter break, and would only turn left! |
lawpressman
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:39 pm: |
|
check all the shift linkage and see if it is ok and not loose.
next shift into reverse pull the right stick back and give it some throttle, it should move. if it wont move its not getting into gear. also make sure the sticks are not hitting the seat when pulled all the way back, the sticks should only move about 6" total. you may have to adjust the t20 trany. call me and we can talk about it. 7407262656 |
Mike S. ( - 149.174.164.74)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:39 pm: |
|
If it wont turn while going forward or backwards,the band may need adjusting or it may be broken if your linkage is right. |
Shop Talk: Tech Tips and Q&A section