| Author |
Message |
    
clark klimaschesky
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: | 
|
I live in Alaska and I bought a 2000
Argo Conquest with the aggresive tires,winch and
an aluminum top that the dealer up here makes and
charges $1,900 for.Total price was just under $14,000.Best money I have ever spent.I also like the motor up front not in the rear as well as the liquid cooled motor.Don't let price be your only factor talk to both dealers and see what you think. The only thing I'm looking for is rubber tracks instead of plastic.Good luck. |
Tom Fogal (Tgfogal)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
Hi Everyone
I'm new to 6 wheeling. I have a new conquest and was wondering what can be done to increase power, like increasing rev limiter or carbs. Any ideas? |
Tom Fogal (Tgfogal)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
I bought a 2001 Comquest. Iam thinking about tacks for the winter. I was wondering if there are any simple trick to increase the power of the 617cc engine? Any comments welcome. |
Rob Wood
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
Has anyone had a problem with cam followers sticking on the V2 kawasaki engine in the conquest. |
Carol
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
Hello out there! I'm doing some research for my husband, he has the Conquest Argo, 8 wheeler and needs PARTS? Can anybody tell me if there is a place to order parts on-line? He needs the tension springs? HELP? |
fred sain
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
CAROL, If you have the part #,s I would be happy to help you. Sincerly Fred Sain (Sain,s Argo)
I am linked to Route 6x6. Just go to Route 6x6 home page. |
Ugashik Bob
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
Has anyone changed a starter on a Conquest/Kaw FD260? Can you remove the brake cooling housing and starter without pulling the transmission. Can get at the upper mounting bolt but now lower. Have ordered the service manual.
Bob Dreeszen
Outlet Lower Ugashik Lake AK |
john elliott
New member
Username: Johnny
Post Number: 1
Registered: 07-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, July 23, 2010 - 06:02 pm: |
|
just bought my first 8x8 1999 argo conquest has kohler FD620D motor seller said 27 hp. We live in belize perfect for aatv. was stored for 6 years . Drained fuel and machine ran great plenty of power. Muddobers nest hit fan and knocked front coil sensor out of align. engine died. Resetsensor. No start due to flooding . checked valves both intake push rods out from under rocker arms. reset pushrods and engine cranked.runs very weak and exhaust looks a little white. havent touched carburator since ran great before very strong .hard to idle low enough to put in gear without dying. any ideas before my three teen age boys put dad in the swamp? No dealers in belize or parts have to order from thre states thanks everyone |
Jeff bar
Advanced Member
Username: Argo8x8
Post Number: 202
Registered: 03-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, July 28, 2010 - 11:09 am: |
|
John
Call Richards Relics 812-944-1643 they are a wealth of information
Jeff Bar |
Bill Judy
New member
Username: Billybob9668
Post Number: 1
Registered: 07-2012
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, July 20, 2012 - 06:59 pm: |
|
Hey everyone, I just bought a 97 Argo conquest with very bad wheel bearings. My question is this, do I need to remove the engine & transmission to replace the front wheel bearings?? All the others are going fine but I am worried about the fronts. Thanks |
Shop Talk: Tech Tips and Q&A section