Posted on Wednesday, February 23, 2005 - 10:35 pm:
Hi,Tim I built an old attex out of three dead ones and I also built my own plow for it. For the plow frame mount I used two 1 1/2 inch water pipe t's and boared them out to be fitted with a peice of hard plastic tubing and a grease fitting. Then I pulled the pins on the front wheel and slid them on and replaced the wheels. It is a great place for the force of the snow plow and EZ to do.
Posted on Wednesday, February 23, 2005 - 10:35 pm:
Hi everyone! I just purchased my first 6X6, it's a Max II. I would also like to know if someone can post a picure of how a snow plow mounts on the front axel. I have a plow on my old Cub Cadet and may be able to make it work on my Max. Also anyone else out there live in Maryland? By the way I think this is a great site! It helped me a lot when deciding which machine to buy.
Posted on Wednesday, February 23, 2005 - 10:35 pm:
David, Your Attex project sounds pretty interesting. Is a new enough model to have the T20 transmission or do you have the old planetary trans like some of us? Do you have any pictures of the project in progress? How about any other ideas like the snowplow set up? Thanks.
Shop Talk: Tech Tips and Q&A section 
