| Author |
Message |
    
inspecotr01
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: | 
|
What is the top speed of a 6x6? Thanks |
MaxRules (Brandon_price)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
Speed varies by model. The fastest is the Max IV 25hp with 26" tires at about 35mph. The fastest Argo is the Bigfoot at about 24mph.
Where we go, you don't need speed.
MaxRules |
Sam Keys
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
Todays machines with modern 4 cycle engine
will run from 18mph (MAX BUFFALO) to about 25mph
Yesterdays machines like the ATTEX 500 SuperChief
would run over 50mph
I have both: An original 500 SC and a newish MAX 4 cycle
both have their place but the 4 cycle machine is much
more useable.
Hope this helps
Sam Keys |
JTBarleman
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
inspecotr01 ...!
Older AATV'S with 2Stroke engines are faster by far than today's 4Stroke machines. In the mid 70's ATTEX made a limited number of AATV'S with a THREE Cylinder 600cc 2Stroke in it. These machines were reportedly clocked at 90 MPH on the race course at Ashtabula Ohio. Even today SOME ATTEX 400cc and 440cc machines that came with a JLO twin cylinder 2Stroke installed ... ARE ... capable of generating 40+ horse power and will top out in the low 70's.
Only problem is finding someone with large enough nads to operate a skid steer vehicle at that speed ... WITH A BIG POCKET FULL OF CASH TO PAY FOR THE REPAIR/REPLACEMENT OF THE VEHICLE ... IF HE SURVIVES AFTER HE LOSES CONTROL.
jt :) |
George
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
I just bought a Chief with the JLO 400. I would imagine that 40mph would be my top speed. I'm guessing that the 400's and 440's while powerful, would need to have some work done to reach speeds of 70mph, no?
Right now my little Colt gets close to 30mph
(and the engine is rated at only 10 hp) and when I'm going that fast, I can't help but think "what would happen if one of my chains broke and tangeled right now?"
Like JT said, "Big Nads!!" |
david berger (Davidrrrd)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:25 pm: |
|
hi george, you will find that some 440cc's can run hundreds of rpm's higher than others, depends on quality and condition,ect, rockwels arnt as high revers as chaperal engins ect.. ect..hp isent the only way to tell, |
Model Citizen
Junior Member
Username: Model_citizen
Post Number: 12
Registered: 07-2017
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, July 26, 2017 - 07:37 pm: |
|
 George's comment from 2005 is so funny. Took a few years, but he definitely knows how to crank his 4 stroke & 2 stroke up a knotch. He just needed more practice in wide open spaces. Kinda fun finding posts from people you know from 12 years ago. |
Dave Evans
Advanced Member
Username: Dozer
Post Number: 186
Registered: 01-2001
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, July 27, 2017 - 10:49 am: |
|
I too have had a bit of fun poking around with old postings, did not realize this board goes back so far? |
WFO
Advanced Member
Username: Wfo
Post Number: 102
Registered: 07-2016
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 26, 2017 - 11:07 pm: |
|
55 HP AL HODGE MOTOR |
Shop Talk: Tech Tips and Q&A section