Will argo 6 wheel tracks fit max 6 wheeler ?

Route 6x6 Discussion Board: Restoration of older ATV's: Will argo 6 wheel tracks fit max 6 wheeler ?
Top of pagePrevious messageNext messageBottom of pageLink to this message   By marty on Unrecorded Date: Edit

will argo 6 wheeler tarcks fit a max 6 wheeler ( maxIV ) ??? THE TRACKS ARE 13 INCHES WIDE . THANKS. MARTY

Top of pagePrevious messageNext messageBottom of pageLink to this message   By David Keeso (Argomag) on Unrecorded Date: Edit

I don't thing that it will fit. Unless you are running runnamucks, I don't know if it would work. I don't know the overall length of the tracks so Its hard to say

Top of pagePrevious messageNext messageBottom of pageLink to this message   By bigkodiak on Unrecorded Date: Edit

Yes they will fit. The only problem is that you will have to use axle extensions or run the risk of rubbing the hull.
I have a buddy of mine has a set and they worked fine except for that.
Russ

Top of pagePrevious messageNext messageBottom of pageLink to this message   By John Bushinski on Unrecorded Date: Edit

Yes, just look in the photo section of this website of my Max 4 with half tracks. I used max axle extensions and a small turf tamer tire, the size is revealed in the text of the picture. Attex ATVs used a track that was made in the same mold as Argo tracks and I copied their setup on my Max. I used Argo tracks on my Max 2 also. Works fine but a little bumpy. Let me know if you have any questions.


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation