By scp on Unrecorded Date: Edit

i broke mine trying to take it off a freind of mine who owns a small engine shop told me that you can order a new one from any small engine shop they just need the belt size and the shaft size. he said that type of cluch is still real common for go -cart

By david berger (Davidrrrd) on Unrecorded Date: Edit

WHAT ENGINE DID IT COME FROM? SOME PEOPLE HEAR HAVE OLD DEAD PARTS ENGINES LYING ABOUT AND MAY BE ABLE TO HELP YOU OUT. I HAVE ONE OR TWO 295CC JLO ENGINES THAT MIGHT HAVE A GOOD CLUCH ON THEM,SOMEONE MAY HAVE A SACKS OR TACUMSA, SO TELL US WHAT ITS OFF OF,

By Attex Bob on Unrecorded Date: Edit

Dave is right. We need to know what engine is in your Scrambler. You can't take a clutch out of a 8000 RPM 2 stroke and bolt it on a 4000 RPM 4 stroke. Just because it will fit on the shaft dosen't mean it will come in at the right RPM. There must be a million combinations with springs and weights!!!! Like Dave suggested it is best to get a clutch off the same engine. Good luck with the clutch and I hope you get that Scrambler going!!!

By phil on Unrecorded Date: Edit

It it is a torque converter type with a belt go to
www.gokartsupply.com they have pages of info
on identifing and replacement parts

By LEONARD SMITH on Unrecorded Date: Edit

I JUST GOT A SCRAMBLER, AND I NEED TO FIND SOME CLUTCH AND BRAKE PARTS ,CAN SOMEONE HELP ME OUT?

By Richard Burley (Mrscrambler) on Unrecorded Date: Edit

Leonard, I have clutch and brake parts and manuals
as well, you can call me @ 770-389-9118 or e-mail
me back. Thanks Richard Burley.

By showme6x6 on Unrecorded Date: Edit

Lenoard I have a scrambler too. Try contacting Jim Washburn. He was a web page with his email address in the personnal link section of route 6x6. Also Richard Burley, check under the new owner registry search by state. He lives in GA. He gives his phone number and email address. Hope this helps.
Steve

By Gary Harper (Garyinvt) on Unrecorded Date: Edit

Leonard
Check with Richard Burley (Mr. Scrambler) HE should be able to help you out. I know he has found a source for clutch and brake material and charges a fair price for them. Hope this helps!