By Brian Johnson (69.29.192.214) on Friday, January 14, 2005 - 09:23 pm: Edit

Hello everyone, I while ago i came across a six-wheeler made by allis chalmers with a Rockwell 2 stroke engine. The ID tag is still on is but the only thing you can make out on it is that it says allis chalmers. I spent some time piecing it back together and patching holes in the fiberglass to make it float again. The problem I have is that the clutch on this thing has a bell and cone that fit into each other on each side of the first driven shaft that works as a clutch and a brake for each side, but the clutches wont engage. I see there are fiber clutch pads on the inside of the clutch bells that must be worn clear out so I was wondering if anybody knew exactly what I have and where I can get or make parts. anything you can tell me would be helpful because this is the first thing like this I've ever had. Thanks

By Mike (68.53.241.218) on Saturday, January 15, 2005 - 06:15 pm: Edit

You have an Allis Chalmers Terra Tiger. The clutches can be relined and Richard who runs this site offers an exchange service for these.