Info on Special Products Division "Wedge" 6x6

Route 6x6 Discussion Board: Restoration of older ATV's: Info on Special Products Division "Wedge" 6x6
Top of pagePrevious messageNext messageBottom of pageLink to this message   By Jeff Schuster (Froggy) on Unrecorded Date: Edit

Thanks to the good folks here, I have found out that the 6x6 that I have is a Wedge made by SPD. Does anyone out there have any info on them (literature, adds or old manuals) or know where I can find parts? I would be VERY appreciative of any and all help that you can offer. Thanks in advance!

http://www.gotocrystal.net/~speedy64/garage.htm

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Rob Taylor on Unrecorded Date: Edit

I have recently had a 295 Wedge givin to me.It's missing the motor,tranny parts and the middle set of wheels.It has the jet drive still in tack and in good shape.Over all the hole buggy is in great condition.BUT I do need info and help finding parts and hopefully a manual.Any help would be great.


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation