By Ted Posobiec on Unrecorded Date: Edit

I am restoring a couple of Old 6X6's and need some help in the Off set of the torque converters. I will be using Salsbruy torque converters on each unit. I will also need some help on finding out how to get the size belt I will need when I am finished.
Any in put will help.
Ted

By scrambler71 on Unrecorded Date: Edit

to ted
from scrambler 71
what kind of machines do you have
i have old scrambler with the original scrambler
belt
i got from richard burley
please post what kind you have
then i can help you out more
thank ted
davey

By Ted Posobiec on Unrecorded Date: Edit

Scrambler71
I am working on Hustlers. My problem is that I am going with different engines.
One unit had a 440 Kohler and the other had a 16 K. I am making new engine mounts. I am going to try and use one of the 2 belts I have but in case that does not work there must be a way to get belt size.
Right now I am more interested in getting the off set of the Torque converter on the engine and the T-20. Do you know what they are on your Scrambler.
Ted

By rick endicott (Rickstoys2000) on Unrecorded Date: Edit

Ted
If you get an accurate measurement between the centerline of the 2 shafts,you can call Comet TorqueConverters and they will tell you what size belt you need. I called them about a 3 wheeler I built and changed the engine,,I gave them the measurement,,she said it should be this size and asked me if I wanted to buy it. It shipped that day for about $30.00,,works great.

Rick
http://rickstoys.www.mypicgallery.com/

By Ted Posobiec on Unrecorded Date: Edit

Thanks Rick: Right now that is not so much a problem. Was wondering if any one knows what the off set of the clutch and torque converter. I do not know if I should use a 5/8 off set. I forgot to take a measurement when I took everything
apart. By the way I like your toys
Ted