Max II tracks right

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: Max II tracks right
Top of pagePrevious messageNext messageBottom of pageLink to this message   By Joey on Unrecorded Date: Edit

My max II has started tracking to the right. I put a 1x4 against the tires. The second and third tire are even, but the whole front tire is about an inch or so in. The left side tires are all even against the board. I checked the tire pressure and I opened it up. I can't see anything right off hand. Any Ideas?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By david berger (Davidrrrd) on Unrecorded Date: Edit

HOW OLD IS IT?
MINE DOSE THAT ALL THE TIME,
MY MAX HAS INNER BUSHINGS AND THE ONE OUTER BEARING,
IT USES THE CAM LOCK TO HOLD THE AXLE IN POSITION,
BUT A BUMP AGENSED A TREE MAYBE PUSHES IT IN OR SOMETIMES THERS SOME SORT OF FORCE THE PULLS IT OUT SOME,
ON MY LEFT SIDE I FINALY HAD TO PUT 3/4 INCH ID WASHERS ON PIN THAT BUSHING END RIDES ON TO BUILD OUT FROM FRAIM TO THE CORRECT HIGHT FROM FRAIM TO PREVENT THE AXLE FROM MOVEING TWARDS THE FRAIM AND CAUSING CHAIN/SPROKET MISALIGNMENT PROBLEMS,
AM STILL HAVEING THAT PROBLEM ON RIGHT SIDE BUT HAVENT GOTEN OFF MY BUT TO DO THE SAME THERE


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation