Info on ATTEX 295 Wild Wolf

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: Info on ATTEX 295 Wild Wolf
Top of pagePrevious messageNext messageBottom of pageLink to this message   By T.J. Valencia on Unrecorded Date: Edit

I just bought a ATTEX 295 WILD WOLF.I was wondering if any body out there knows about this model aatv?I can't seem to find anything on this model.What about part recourses?Any books or publications you all know about?
Thanks,T.J.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By gary mack (Gary) on Unrecorded Date: Edit

just bought one too, mine also a attex 295 wild wolf i need wiring schematic for mine and nned to know about how the front chain tensioners are supposed to be. also need to know how wires plug into little box on left rear.poss. voltage reg. i can tell you where to get axle bearings and sprockets cheap. Roy

Top of pagePrevious messageNext messageBottom of pageLink to this message   By T.J. Valencia on Unrecorded Date: Edit

I'm in the process of trying to restore mine.Somebody put a 10hp motor in place of the origanal motor.The body is busted up pretty good,too.There was a huge crack running down the bottom of it.Would it still float like this?What year is yours?Where and is there an identification plate?Thanks,T.J.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By T.J. Valencia on Unrecorded Date: Edit

I'm in the process of trying to restore mine.Somebody put a 10hp motor in place of the origanal motor.The body is busted up pretty good,too.There was a huge crack running down the bottom of it.Would it still float like this?What year is yours?Where and is there an identification plate?Thanks,T.J.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By george on Unrecorded Date: Edit

i need help on my ATTEX bakerhill model please contact me at philcolawnco@aol.com thanks george!!

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Joel Haslett (Rustyjeep) on Unrecorded Date: Edit

T.J., I have a few of the early Attex machines here,I belive they were built around 1968. The I.D. tag was in the middle of the dashboard ,but mine are all missing. There are some old discussions on the Discussion Board about ABS body repair . A few of the guys on the board have been pretty helpfull to me about sharing info . I see that Richard has Attex manuals for sale on the Shoppe page for both early and late Attex. Good luck .

Top of pagePrevious messageNext messageBottom of pageLink to this message   By david berger (Davidrrrd) on Unrecorded Date: Edit

gary m, it's a bridge rectifire, the two leads near the base (mounting bolts) are to your batery, the two ferthest away (yellow) are from your lighting coiles, a bridge rectifire chainges ac to dc,
t.j.v your body can be repaired, check out restoring old vehicles "attex & amphecat" strings,myself or jole haslet, garyharper, or phillip osborn can help, we are all resoring abs body vehicles,

Top of pagePrevious messageNext messageBottom of pageLink to this message   By T.J. Valencia on Unrecorded Date: Edit

Joel,
Thanks for the info.I was looking on the dash and seen 2 holes where I'm assuming the I.D. plate was.I did happen to find some numbers on the dash.They were:PAT. NO.3,581,600 and
PAT. NO.3,526,147.Is there any way of telling what year it is by these numbers?
Thanks,T.J.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By T.J.Valencia on Unrecorded Date: Edit

Mine also has the T-20 in it.These are '70 and above models aren't they?
Thanks,T.J.


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation