By Frank Carter (Madmax6x6) on Unrecorded Date: Edit

I have about a 2x2 in. hole in my max IV, and I
would like to know what is the best way to fix it.
Any help would be appreciated.It is on the bottom.

By david berger (Davidrrrd) on Unrecorded Date: Edit

if it's not real old it'l be polyethilin, you can weld it with a soldering iron if you still have the old piece or you can weld in polyethilin from oil containers or stuff like that, you can also get sheets of it from mcmaster car and pop rivit or bolt it into place, posably welding the seam after that with that soldering iron trick

By Slammy on Unrecorded Date: Edit

Depends what the hole was made by...12ga.slug,oo buck,RPG,Claymore etc.

By david berger (Davidrrrd) on Unrecorded Date: Edit

claymore??
crist i hope i don't find any of them thing's when i go trail riding : )

By steven caldwell (Pisgah001) on Unrecorded Date: Edit

David's soldering iron trick worked great for me. I used a 100 watt iron (made for stained glass) in conjunction with a heat gun (paint stripper) to preheat the area.

I had an old HDPE 55 gal drum I used for filler rod. Look for the HDPE label beneath the recycle symbol on all plastics.