Argo body

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: Argo body
Top of pagePrevious messageNext messageBottom of pageLink to this message   By jerry smith (Deerhunter) on Unrecorded Date: Edit

Hello -Any one know if the rubber seal going around the Argo body is glued on from the factory. Anyway for the first time in five years a section of mine is hanging off. thankyou for any help Jerry

Top of pagePrevious messageNext messageBottom of pageLink to this message   By fsain on Unrecorded Date: Edit

Jerry, The seal is not glued on. It is just stretched on. You can glue it with 100% silicon.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Laurier on Unrecorded Date: Edit

I just received my new Argo Conquest and it is tundra green. I would like to change the color to red, blue or yellow. Is there any one with one of these colors that would like to change the upper body. My upper body is like new. I located 1 hour north of Ottawa Ontario.
Laurier

Top of pagePrevious messageNext messageBottom of pageLink to this message   By bayyhh3f on Unrecorded Date: Edit

Kryon Man.
Krylon will let you make it any colory you want.

Discover this revolutionary paint for plastic - Fusion. This top-selling paint is the first of its kind that bonds to plastic

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Laurier on Unrecorded Date: Edit

No thanks when you get scratches it will not look good, as the base colour will show through

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Dan C on Unrecorded Date: Edit

Are you sure that it will stick good,I'd hate to paint my Argo and have the paint start to flake off when I drive through the bush
Dan

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Laurier on Unrecorded Date: Edit

If you choose to paint your plastic there are some very good commercial products out there. If applied right they will not peel. Haven said that, when you rub up against something, the base colour of the plastic would show through the paint. It will look like sh*T after few rides

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Barry Williams (Barryhh3f) on Unrecorded Date: Edit

I Believe yes I do!

OK, it may be marketing hype, but I am going to try it on my Coleman Scanoe when the snow is gone ( I have 4 feet in the back yard and we are getting some more right now.

I all ready know latex paint wont stick, and boy does that get ugly looking when the food coloring washes out of the paint. If it sticks good I will try yellow high lights on my black Bigfoot. Then I will have the largest Bumble Bee in Alaska.


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation