By keith bergh (Highlander) on Unrecorded Date: Edit

I PICKED UP A KADOO THIS WINTER. NEW TO THE 6 WHEELER WORLD COULD SURE USE SOME HELP. TRIED TO ADJUST AND NOW DOESN'T TURN EITHER WAY. IT ACTS LIKE IT WANTS TO START TURNING BUT THEN SEEMS TO GO INTO NEUTRL WHEN I LET OFF THE STEERING WHEEL IT GOES AGAIN. TRIED TO ADJUST THE PRESSURE PLATES BUT JUST DON'T HAVE THE MECHANICAL BACKROUND. IS THERE A STANDARD SETTING TO START FROM. SURE WOULD APPRECIATE ANY HELP.I CAN PROVIDE PICS IF THAT WILL HELP.

By roadwolf on Unrecorded Date: Edit

keith, did it turn at all before you made or tried to make a adjustment?
if it did you may have adjusted it too tight.
with the engine off, the steering wheel in a neutral position you should be able to pry the pressure plates apart and have a gap about 3/32 to 1/8 of a inch.

By Pete Cagle (Petec) on Unrecorded Date: Edit

are you sure it is a kadoo i thougt they ran a t-20 in them at least the one i had did sounds more like a scrambler

By pete6x6 on Unrecorded Date: Edit

Pete,

Kadoos have two clutch plates in them like a scrambler I have a friend that has one.

By keith bergh (Highlander) on Unrecorded Date: Edit

does anybody know if i can get parts for these clutch plates?

By roadwolf on Unrecorded Date: Edit

keith,
you can get your plates relined at a brake rebuild shop.