Drive Belts

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: Drive Belts
  Subtopic Posts   Updated
Archive through September 25, 2000  7    

Top of pagePrevious messageNext messageBottom of pageLink to this message   By newmax on Unrecorded Date: Edit

are the belts for the 200 max 1v standard belts that you can buy local?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By newmax on Unrecorded Date: Edit

can someone tell me how to get the belts off a max 1v. there is not very much room between the lower pully and the tub.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Fred Sowerwine, Montana's Max Dealer (Fred4dot) on Unrecorded Date: Edit

Mike, roll it off the driven pulley, twisting it enough to go between the body and the pulley. I take it of in front of the engine.


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation