By Chris on Unrecorded Date: Edit

I went to my local auto shop and couldn't find a hitch ball with a small enough shank to fit through the hitch on my Max. I've seen other people have a hitch ball on theirs, does anyone know where I can find a smaller diameter shank that would fit a Max?

By mike tufano (Maximus) on Unrecorded Date: Edit

yes its called get out a dremil or air grinder with an half inch bit and inlarge the hole 1/16 to allow the ball shank to fit.good luck! it took me 5 min.

By mark harding (Promoza) on Unrecorded Date: Edit

ok chris was in the same spot the hole was to small i took a die grinder to inlarge mine it fit's now just a small bit needed to be removed good luck
mark

By Chris on Unrecorded Date: Edit

Ummmm.... I don't have a grinder, but I do have a dremil. That can grind away metal? Seems a bit out of it's league, but I'm game to try it. Thanks for the tips guys.

By Brian S on Unrecorded Date: Edit

Go to a farm store and buy one for a atv or lawn mower and it will be the right size.

By pete6x6 on Unrecorded Date: Edit

Chris,


Your local Tractor Supply has them.