JLO 295: CDI ELECTRONIC SPARK CONVERSION

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: JLO 295: CDI ELECTRONIC SPARK CONVERSION
Top of pagePrevious messageNext messageBottom of pageLink to this message   By ISAAC EISENMAN (Tropicjungleboy) on Unrecorded Date: Edit

i just replaced (eliminated!!) points and condenser on my jlo 295 engine..instead i install a cdi module (northern 701214-b951 at $ 10.49)..now spark looks as blue as alabama sky!!!.. also engine start easily with rope or electric.......overall performance is great even without spark advance mechanism.....
to get proper timming i rotated 90 degree to right the coils base ( the ones that hold the spark + light coil)...supress the black and the blue cable and pull out the black cable that came from spark coil....this cable goes to positive of cdi with the black cable that's goes to killing switch.... negative of cdi cable goes to positive terminal of seccondary coil ( where the blue cable used to go)....cdi housing get secured to air housing of engine and that's it!!!!now jlo engine get "update" with electronic ignition...i highly recoment this improvement......


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation