I really need the wiring diagram for a 1974 Attex Chief 400 with the JLO engine because I have no spark!!!!

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: I really need the wiring diagram for a 1974 Attex Chief 400 with the JLO engine because I have no spark!!!!
Top of pagePrevious messageNext messageBottom of pageLink to this message   By Brett on Unrecorded Date: Edit

I have an attex chief 400 and it is not getting spark. THe wiring harness is worthless and i want to make my own new one but I dont know what the different wires on the motor are for. A wiring diagram would really help!! Could ANyone email me one or tell me where I could get one?

THANKS!!!!

Top of pagePrevious messageNext messageBottom of pageLink to this message   By liflod (Liflod) on Unrecorded Date: Edit

I have an original 1973 owners manual with the wiring diagram in it. I will try to scan it today and send it via E-mail. I'm not sure how much detail it has on the ignition system. No spark on both plugs or only one? If it is only one, it is probably a coil. If it is both , there may be a short on the shut-off wire.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By E L McKenney on Unrecorded Date: Edit

If this is a 2-stroke engine, just pull all of the connectors and it will get spark, I got a real good deal on my MaxIV because someone tried to wire in an automotive type switch which makes a connection to go hot versus a snowmobile type switch which makes a connection to kill

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Sam Keys on Unrecorded Date: Edit

By now everyone should know that richard has manuals
at only a small charge. I think some people are just too
cheap to buy one

Sam Keys

Top of pagePrevious messageNext messageBottom of pageLink to this message   By liflod (Liflod) on Unrecorded Date: Edit

Sam, this board is here for people to share information. And yes, I am too cheap to buy something that I can get for free elsewhere.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Sam Keys on Unrecorded Date: Edit

I bet you will not get much help with your mind set

Sam Keys

Top of pagePrevious messageNext messageBottom of pageLink to this message   By liflod (Liflod) on Unrecorded Date: Edit

Hopefully most people on this board have the mind set to help out people in need of information. I have a manual, I scanned the diagram and sent it to Brett. He has the information he needs and I will send him more if I have it. Why did you post such a smart %$^$&^%^& reply on this board to begin with.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Sam Keys on Unrecorded Date: Edit

Because all you short sided people do not feel
any need to suport Richard as he provides us
ROUTE6x6 to use. Think about it, if you can.

As been stated before...you should have known Ha Ha

Sam Keys


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation