Am I hurting my T-20?

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: Am I hurting my T-20?
Top of pagePrevious messageNext messageBottom of pageLink to this message   By Bill cripe (Bcripe) on Unrecorded Date: Edit

Hello, On my Max II I have removed the springs which hold the levers forward. IMHO it makes it much easier to drive. Last weekend I has dragging a drag covering grass seed on my property. After a while I got tired of gripping the throttle so I just tied it open. When I wanted to stop I just pulled the sticks back. When going forward I would just ease the sticks forward. Seemed OK. Is it?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Fred Sowerwine, Montana's Max dealer (Fred4dot) on Unrecorded Date: Edit

Bill, I don't think you will hurt the tranny any doing that (I slip steer a lot), but it could be a little hard on your engine running full throttle with no load when you have the levers in tranny neutral. Be sure that you have your levers all the way forward when you are going or it will appear that you don't have full power.


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation