Cuyuna 2SI CDI conversion to a 400 JLO motor
Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: Cuyuna 2SI CDI conversion to a 400 JLO motor
Top of pagePrevious messageNext messageBottom of pageLink to this message   By Steve on Unrecorded Date: Edit

I'm looking at buying the capacitive discharge ignition components from a Cuyuna 2Si 430 engine and adapting them to a 400 JLO motor. I hate ignition points. The biggest unknown is adapting the stuff under the flywheel.

Does anyone have any experience with such a modification?

Does anyone have the CDI parts they would like to sell?

Thanks

Steve

Top of pagePrevious messageNext messageBottom of pageLink to this message   By mr. tinker ( - 24.107.153.248) on Unrecorded Date: Edit

http://members.aol.com/pullingtractor/ignition.htm this may work for you. i put this type ignition on my atv and it saved me 400 dollars.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Steve on Unrecorded Date: Edit

Mr. Tinker:

I would like to hear more about the ignition system. Could you send me a note and tell me more.

Thanks

Steve

Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation