T-20 Trans Mod question
Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: T-20 Trans Mod question
Top of pagePrevious messageNext messageBottom of pageLink to this message   By David Seidel (6x6aatv) on Unrecorded Date: Edit

Does anyone know if you were to use the T-20 configured so that the input shaft was turning the opposite direction, would the trans still function, meaning the bands/brakes work correctly?
Other than everything turning opposite, this should work, correct?
Thanks, David

Top of pagePrevious messageNext messageBottom of pageLink to this message   By liflod (Liflod) on Unrecorded Date: Edit

You would have no problem at all. If the input is spinning the opposite direction, just put the transmission in reverse and everything is correct.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By david berger (Davidrrrd) on Unrecorded Date: Edit

just be shur your input secondary pully works in that direction, if it dose fine the trany itself dosent cair, buy many input secondary cluch pullys work in one direction only,

Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation