By Tony Kubik on Unrecorded Date: Edit

I am trying to remove my argo trans. I removed the bolt from the center of the pulley(belt)but nothing moves. I cannot remove the 2 frame mount bolts until I remove the disk brakes which cannot be removed until the pulley is off. I am working blind as I am in Alaska with no dealer within 300 miles and no literature on hand. Thanks for your help.

By Attex Bob on Unrecorded Date: Edit

I think it is easier to pull the whole power pack and then deal with the tranny.

By argoguru on Unrecorded Date: Edit

tony,
the pulley you are refering to I believe is the secondary clutch. that should slide right off with the bolt removed. if it doesn't, take a dead blow hammer to it, I use a 15 lb. when you do reistall everything, use anti-seize on the output shafts and the input shaft where the brake discs' and the secondary clutch slide on.