Imformation on Argo Conquest

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: Imformation on Argo Conquest
Top of pagePrevious messageNext messageBottom of pageLink to this message   By clark klimaschesky on Unrecorded Date: Edit

I live in Alaska and I bought a 2000
Argo Conquest with the aggresive tires,winch and
an aluminum top that the dealer up here makes and
charges $1,900 for.Total price was just under $14,000.Best money I have ever spent.I also like the motor up front not in the rear as well as the liquid cooled motor.Don't let price be your only factor talk to both dealers and see what you think. The only thing I'm looking for is rubber tracks instead of plastic.Good luck.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Tom Fogal (Tgfogal) on Unrecorded Date: Edit

Hi Everyone
I'm new to 6 wheeling. I have a new conquest and was wondering what can be done to increase power, like increasing rev limiter or carbs. Any ideas?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Tom Fogal (Tgfogal) on Unrecorded Date: Edit

I bought a 2001 Comquest. Iam thinking about tacks for the winter. I was wondering if there are any simple trick to increase the power of the 617cc engine? Any comments welcome.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Rob Wood on Unrecorded Date: Edit

Has anyone had a problem with cam followers sticking on the V2 kawasaki engine in the conquest.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Carol on Unrecorded Date: Edit

Hello out there! I'm doing some research for my husband, he has the Conquest Argo, 8 wheeler and needs PARTS? Can anybody tell me if there is a place to order parts on-line? He needs the tension springs? HELP?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By fred sain on Unrecorded Date: Edit

CAROL, If you have the part #,s I would be happy to help you. Sincerly Fred Sain (Sain,s Argo)
I am linked to Route 6x6. Just go to Route 6x6 home page.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Ugashik Bob on Unrecorded Date: Edit

Has anyone changed a starter on a Conquest/Kaw FD260? Can you remove the brake cooling housing and starter without pulling the transmission. Can get at the upper mounting bolt but now lower. Have ordered the service manual.
Bob Dreeszen
Outlet Lower Ugashik Lake AK


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation