Speed

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: Speed
Top of pagePrevious messageNext messageBottom of pageLink to this message   By inspecotr01 on Unrecorded Date: Edit

What is the top speed of a 6x6? Thanks

Top of pagePrevious messageNext messageBottom of pageLink to this message   By MaxRules (Brandon_price) on Unrecorded Date: Edit

Speed varies by model. The fastest is the Max IV 25hp with 26" tires at about 35mph. The fastest Argo is the Bigfoot at about 24mph.
Where we go, you don't need speed.

MaxRules

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Sam Keys on Unrecorded Date: Edit

Todays machines with modern 4 cycle engine
will run from 18mph (MAX BUFFALO) to about 25mph

Yesterdays machines like the ATTEX 500 SuperChief
would run over 50mph

I have both: An original 500 SC and a newish MAX 4 cycle
both have their place but the 4 cycle machine is much
more useable.

Hope this helps

Sam Keys

Top of pagePrevious messageNext messageBottom of pageLink to this message   By JTBarleman on Unrecorded Date: Edit

inspecotr01 ...!
Older AATV'S with 2Stroke engines are faster by far than today's 4Stroke machines. In the mid 70's ATTEX made a limited number of AATV'S with a THREE Cylinder 600cc 2Stroke in it. These machines were reportedly clocked at 90 MPH on the race course at Ashtabula Ohio. Even today SOME ATTEX 400cc and 440cc machines that came with a JLO twin cylinder 2Stroke installed ... ARE ... capable of generating 40+ horse power and will top out in the low 70's.

Only problem is finding someone with large enough nads to operate a skid steer vehicle at that speed ... WITH A BIG POCKET FULL OF CASH TO PAY FOR THE REPAIR/REPLACEMENT OF THE VEHICLE ... IF HE SURVIVES AFTER HE LOSES CONTROL.

jt :)

Top of pagePrevious messageNext messageBottom of pageLink to this message   By George on Unrecorded Date: Edit

I just bought a Chief with the JLO 400. I would imagine that 40mph would be my top speed. I'm guessing that the 400's and 440's while powerful, would need to have some work done to reach speeds of 70mph, no?
Right now my little Colt gets close to 30mph
(and the engine is rated at only 10 hp) and when I'm going that fast, I can't help but think "what would happen if one of my chains broke and tangeled right now?"
Like JT said, "Big Nads!!"

Top of pagePrevious messageNext messageBottom of pageLink to this message   By david berger (Davidrrrd) on Unrecorded Date: Edit

hi george, you will find that some 440cc's can run hundreds of rpm's higher than others, depends on quality and condition,ect, rockwels arnt as high revers as chaperal engins ect.. ect..hp isent the only way to tell,


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation