Rotax Info Needed!

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: Rotax Info Needed!
Top of pagePrevious messageNext messageBottom of pageLink to this message   By Chris Heili (Trailboss) on Unrecorded Date: Edit

I recently purchased a Sierra Trail Boss and the original Kohler 20 hp engine had been replaced by a Rotax 299 c.c. Anyone know what the horsepower would be? I am also trying to identify the year.
The number on the tag is 1583217.
ANY ROTAX EXPERTS OUT THERE?

THANKS!

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Kevin Percy on Unrecorded Date: Edit

Chris,
The old Intertec Snowmobile manual I have lists a Rotax displacing 299.4cc and gives HP as 12 - 15.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By JT Barleman on Unrecorded Date: Edit

Chris... I hate to show my ignorance ... BUT ... are you sure you are looking for info on a 299cc Rotax ... and not on a 399cc..?
The reason I ask is Rotax and JLO are nearly identical ... and ... 252cc - 295cc - 399 cc are USUALLY the correct sizes. IF your ROTAX is a twin cylinder ... it's probably a 399cc engine. and I can help with info. IF it is 299cc ... sorry..!
JT

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Chris Heili (Trailboss) on Unrecorded Date: Edit

Kevin, Thanks for taking the time to look.
I appreciate the info. Does your book have the recommended gas/oil mix ratio?


JT, It is definitly a 299 according to the Tag. It is a single cylinder and says Rotax on it. I wish you were right (399). I could use the extra power! Maybe next winter I will transplant a 440 or something. Any good suggestions for upgraded power?
Chris(Trailboss)

Top of pagePrevious messageNext messageBottom of pageLink to this message   By JT Barleman on Unrecorded Date: Edit

Chris ...!
Before you upgrade power ... strongly suggest you beef up those two Trailboss trannies. The are notorious for a weak spot that needs beefed up by welding.
If you are really serious about beefing up the power ... Today may just be your lucky day. I have a Rockwell JLO twin 399cc (professionally rebuilt 7/2000) that I'm pulling out of my Attex and replacing with a 16HP 4 stroke. E-mail me at namelrab@sgi.net and let's see if we can make a deal.
JT

Top of pagePrevious messageNext messageBottom of pageLink to this message   By lawrence on Unrecorded Date: Edit

I have a Rotax 399 cc two stroke in a Playcat tracked ATV (twin tracks) and need some info on spark plugs(non-suppressed), oil/fuel ratio, etc.
Any info would be much appreciated! Thanks,Lawrence

Top of pagePrevious messageNext messageBottom of pageLink to this message   By mike abbey on Unrecorded Date: Edit

1969 rotax 399cc the book says 40to1 premium gas and good oil, champion plug regular n-2 or platnum gold n59g or L81,L82 std plug orL6G platnum champion plugs thes are numbers from 1969 so the may need crossrefrencing.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By david berger (Davidrrrd) on Unrecorded Date: Edit

YES AND PREMIUM GAS IN 1969 WAS A WHOLE LOT HIGHER IN OCTAINE,
YOU SIMPLY CANOT MACH IT UP WITH PUMP GAS NOW, ONLY SPECELTY FUELS COME CLOASE. AND THERE BIG$$$$$


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation