1988 argo blows oil by dip stick
Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: 1988 argo blows oil by dip stick
Top of pagePrevious messageNext messageBottom of pageLink to this message   By MB on Unrecorded Date: Edit

after 30 minutes of running my engine starts burning oil and if you take dip stick off oil just pours out like mad I replace rings and refaced valves and seats still the same problem. please reply with any info thanks...

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Eddie Beddingfield on Unrecorded Date: Edit

Check the crankcase breather,itis where you access the valves. Make sure the valve is free, If not clean this with carb cleaner. Make sure it is plumbed to airhorn on carb inlet. this pulls a vacuum on crankcase to prevent leaks and blowby on rings and valves. Hope this helps. Eddie

Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation