By jim on Unrecorded Date: Edit

hi i need to put a bilge pump in my max iv. what is the best way to fasten it and ware is the best location exactly and what should i look out for,I mean pit falls that i might fall in to.thanks for any help.

By david berger (Davidrrrd) on Unrecorded Date: Edit

pitfall # 1)
never bet your life on a builge pump working,
they are a verry sensable backup plan but
cannot be posativly relyed on,
our machines acumulate leaves,sticks n dirt.
and the acational 1 or 2 gross of asorted bugs.
things of that nature tend to gumb up the best of them so one key to a builge pumps "readyness" might be how often you clean out your entire hull,

a builge pump with a detachable mount is a wise choice as then you may be able to quickly and easaly detach and clean it out if nesesary right there in the thick of it,
a quick disconect on your hose and wires wouldent hurt ether,
good luck dude,
this might make a good "how too "video huh
david berger
daves atv videos

By Kevin Streeter (67.141.71.107) on : Edit

Im'running two builge pumps in my hustler.But keep
in mind the debris that will get in the hull. So
installing a mesh screen around pump will extend
life of pump and keep it from stopped up with debris.