Argo conqest track removal

Route 6x6 Discussion Board: Other Related ATV Topics: Argo conqest track removal
Top of pagePrevious messageNext messageBottom of pageLink to this message   By George Gardner ( - 64.136.26.227) on Unrecorded Date: Edit

I am a new and proud owner of a 1995 conquest. It came with super tracks. How do I remove them ? Can anyone help ?????? Thank you

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Argobro (Argobro) on Unrecorded Date: Edit

Remove the set screw from the collar in the middle of one of the steel rods that hold each section of track together.Do this at either the front or back of the machine so that when you drive out the pin it does not hit the body.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Dave J on Unrecorded Date: Edit

If you get them off, it is not as easy to reverse the process to get them back on. I usually drive onto the tracks then let the air out of all the tires. Then I use C-clamps to pull the track together and slip the rod back thru, making sure I get the collar in as I do it. After tightening up the set screw, I release the C-clamps and pump the tires back up. It is a good idea to have extra set screws because if one comes out, it is a devil to find.


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation