Topics Topics Help/Instructions Help Edit Profile Profile Member List Register  
Search Last 1 | 3 | 7 Days Search Search Tree View Tree View  

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Jerry R. Nuss
Advanced Member
Username: Jerrynuss

Post Number: 117
Registered: 02-2005
Posted From: 71.244.216.2

Rating: N/A
Votes: 0

Posted on Sunday, November 06, 2005 - 12:50 pm:   

Ok, Well go through everything. Change the fluids in the engine and transmission. Then go through it and retorque everything. Check and make sure the transmission is tightened down. Check the bearing flanges and make sure they are tight. Check the transmission adjustment and amount of control travel. Spray the drive and driven clutch with silicone. Remove the belt and check it for chunks missing and condition. If it looks ok, put on belt dressing by hand on the outside edges and reinstall. Check the chain tensioners and chain tension. Check tire pressure and run it at 2 to 3 psi, check tire pressure everytime you use the machine.


These are all basic things to check. It may be in great shape and not need anything done to it. So just give it a good looking over. Take your time learning to drive it. If you don't have a fire extinguisher in the vehicle get one and mount it where it can be easily reached and deployed.